Menu
  • Find my agency
  • (en)

HEA Beam

Standard quality

Beam section

Standard quality

Length

Standard quality

Process sub familySee our guide !

Standard quality

GradeSee our guide !

No account? Enter a zipcode to see prices

Already an account? Log in to see your prices

HEA beams are hot-rolled steel products. Prepared with a silicon content ranging between 0.15% and 0.25%. They are suitable for zinc coating.The central part of the beam is called ”the core” while its sides are called ”wings” or ”flanges”.The beams, regardless of their shape (I, H or U), have the following common characteristics:

  • height greater than or equal to 80 mm
  • normally symmetrical wings of equal width
  • the outer faces of the wings are parallel
  • the wings either have thickness that gradually decreases from the core towards the edge (so-called ”inclined wings” sections) or have constant thickness (so-called ”parallel wings” sections).
  • The surface of the cores is connected to the inner faces of the wings by fillets.The grey, marbled or rough areas may appear but have no effect on the corrosion resistance.The beam is characterised by the following dimensional elements:
  • The widths and thickness of the core and wings
  • The radius between the wing and core

  • To Top
    DISTRIVERSION :
    Your browser is out-of-date!

    Update your browser to view this website correctly. Update my browser now

    ×