Menu
  • mon agence Basel
  • 0

    Dans mon panier

     Voir mon panier Long Arrow icon
  • (en)
  1. Accueil
  2. Poutrelle
  3. Poutrelle en H
  4. Poutrelle HEB

HEB Beam

Qualité standard

Section Poutrelle

voir plus
Qualité standard

Longueur

voir plus
Qualité standard

Processus de fabricationVoir notre guide !

voir plus
Qualité standard

QualitéVoir notre guide !

voir plus
Total HT
en €
Poids total en KG (informatif)
PC

Due to current market situation, the max. order quantity is limited

HEB beams are hot-rolled steel products. Prepared with a silicon content ranging between 0.15% and 0.25%. They are suitable for zinc coating.The central part of the beam is called ”the core” while its sides are called ”wings” or ”flanges”.The beams, regardless of their shape (I, H or U), have the following common characteristics:

  • height greater than or equal to 80 mm
  • normally symmetrical wings of equal width
  • the outer faces of the wings are parallel
  • the wings either have thickness that gradually decreases from the core towards the edge (so-called ”inclined wings” sections) or have constant thickness (so-called ”parallel wings” sections).
  • The surface of the cores is connected to the inner faces of the wings by fillets.The grey, marbled or rough areas may appear but have no effect on the corrosion resistance.The beam is characterised by the following dimensional elements:
  • The widths and thickness of the core and wings
  • The radius between the wing and core

    • Veuillez sélectionner toutes les caractéristiques afin d'afficher le tableau des spécifications techniques